Convert Your Air Suspension to a Coil Spring Suspension. End Your Air Suspension Problems Forever. Air Suspension Conversion Kits are the most sensible solution to replacing your broken, torn, or worn out factory air suspension. The most common signs an air system that is failing are ride height issues. Your vehicle may be sagging on one side or both left and right. Sometimes you will even have a ride height sensor that will immediately tell you there is an issue. There may also be discomfort in your ride with a faulty air spring. Designed to be very affordable, you can convert your air suspension to use TEMCO standard shocks/struts and coil springs for less than the price of replacing one air strut. We also offer hydraulic and magnetic suspension conversion kits.
No longer will these parts be an issue with a coil conversion kit. The new springs that will replace your air springs do not have the same enemies that rubber does. In fact, the replacement kits will last you a lifetime and that is backed by warranty.
Here are some of the problems you will avoid when you switch a conversion kit:
Instead of dealing with these issues that can potentially leave you without a working vehicle, experience the following advantages with a TEMCO conversion kit:
In March 2020, China suspended entry into the country for all foreigners. For necessary or emergency entry into China, foreigners need to apply for a new visa at the Chinese Embassy.
Travelers with visas obtained after March 28th 2020 will be allowed to enter China.
In September 2020, restrictions were eased for foreign nationals holding valid Chinese residence permits for work, personal matters, and reunion. They are allowed to enter China with no need to apply for new visas.
Starting from March 15th 2021, China provides facilitation for reunion, work, and business visa applicants who have been inoculated with COVID-19 vaccines produced in China and obtained a vaccination certificate.
So, now there are three ways to go to China:
Holding valid Chinese residence permits for work, personal matters, and reunion
Holding a diplomatic, service, courtesy, or C visa
Applying for a new China visa (the previous visa will not be cancelled) only for work or emergency humanitarian needs, such as visiting a seriously ill family member
FAQs about Traveling to China
1. If I hold a L, 10-year, Q, or X visa, can I go to China now?
No. Those holding certain visas (L, 10-year, Q, or X visas) issued before March 28th, 2020 cannot enter China (even if vaccinated).
2. My family members (wife/husband, fiancée/fiancé…) are Chinese citizens and now in China, can I enter China to visit them?
Probably not. Family visits to China are still impracticable if you don’t have a residence permit for reunion. However, now, if you have been fully inoculated with a Chinese vaccine, there is a new avenue to apply for a reunion visa to go to China.
3. Can international students return to China yet?
No. International students cannot return to China yet. There is no official news yet on when China will open its borders for international students.
4. How to apply a new visa to China?
Please see the section “China Visa Restrictions“. We suggest purchasing your ticket to China after you confirm that your visa application was successful.
5. Do I need to be quarantined when entering China? Is there any way to shorten or avoid quarantine time?
Yes. Anyone entering China needs to be quarantined, whether you are vaccinated or not. There is no way to shorten or avoid your quarantine time. More to see “China Quarantine Rules“.
6. Can I transit into Mainland China through Hong Kong?
No. Hong Kong / Macau / Taiwan cannot be used to transit into Mainland China.
7. I am from USA/South Africa, and I have already inoculated with Chinese vaccine and hold a valid residence permit. I need to go back to USA/South Africa and return to China. Is that ok? (Update July 26)
Yes. If you go back to USA/South Africa, your residence permit is still valid. You can come back China with your current valid residence permit without applying a new visa.
But you need to contact the Chinese Consulate in USA/South Africa to get approval first before you buy the ticket. In the case of Los Angeles, you need to submit your information here.
You are required to be quarantined when return to China.
8. I am from UK, and I have already inoculated with Chinese vaccine and hold a valid residence permit. I need to go back to UK and return to China. Is that ok? (Update July 26)
Yes. You can go back to UK and return to China with the same valid residence permit. You need to be quarantined when you return to China.
Other countries that apply this policy include Canada, Belgium, Italy, and France.
Policy changes quickly. Please double check with the Chinese consulate/China visa center to ensure your trip.
China may open its borders to visitors in early 2022 according to current trends:
The use of COVID-19 vaccines around the world is improving the situation. According to the World Health Organization, at least 180 countries and regions have started vaccinating.
China aims to vaccinate up to 80% of its population, or over a billion people, by the end of 2021 or mid-2022.
2. Safty driving, Keep your eyes ahead, No need to down your head to see Dashboard while driving
3.Nano-technology to eliminate double reflections, more clarity
4. Easy to Install, Only need connect the HUD with Car OBD port by OBD cable, HUD will display when car engine on / off
5. Over-time driving Alarm, Low Voltage Alarm, Over-speed Alarm, High temperature Alarm, Engine faulty Alarm
6. KMH & MPH Switch Freely.
7. Compatiable for: Cars in OBD II Standard (after 2007 years)（Diesel cars, pure electric cars, hybrid cars cannot be used）
8. Installation position: On Center Console
9. Connection: Connect with Car OBD port
10. Display information: speed, RPM, water temperature, voltage, single driving distance, low voltage alarm, high water temperature alarm, over speed alarm, freely switch between kilometers & miles.
11. Multi-color design makes the screen clearer and easier to read
12. 5-level brightness adjustment, automatic and manual brightness adjustment mode
All TEMCO products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 1-year warranty.
The charging box is designed to be more rugged and even could resist the rolling and crash of the car, IP66 ensure the perfect work outdoos in any environment includign rain and snow.
Automatically Intelligent Repair
The smart chip is equipped to automatically repair common charging errors, It could also restart the power to power to protect the device from stopping charge caused by voltage fluctuation.
Conversion from 10 to 16A
There is a Shift key, you just need to press to switch the current. However, it must be noted that switching can not do if the plug on the vehicle is connected to the vehicle. They can be changed when the plug on the vehicle is disconnected from the vehicle.
NEMA 6-20 PLUG
Please remember that our wall plug is 240V 20amp NEMA 6-20, please check carefully to avoid buying the wrong socket.
NEMA 6-20 Also known as “T-Slot” Mates with a 6-20R . Receptacle You need a NEMA 6-20 Outlet.
FREE NEMA 5-15 Adapter
You can use the charger not only in the 220V (NEMA6-20) socket, but also in the 110V (NEMA5-15) socket.
Temperature Monitoring
Real-time monitor is equipped to detect the temperature of the car-end and the wall-end plugs. Once the temperature is detected above 55°C, the current will be cut off immediately. When the temperature returns below 30°C, charging wil resunme off.
Cable Material TPU
Our cables are made of TPU (Thermoplastic polyurethanes), which is comfortable to the touch, more resistant to abrasion and high temperature, and can keep the cables soft even in minus 35°C environment.
Temperature Monitoring Real-time monitor is equipped to detect the temperature of the car-end and the wall-end plugs. Once the temperature is detected above 55°C, the current will be cut off immediately. When the temperature returns below 30°C, charging wil resunme off.
CAUTION
1. Don’t submerge the EV charging box in water.
2. Don’t step on, fold or knot the cable.
3. Don’t drop the EV charging box or place a heavy object on it.
4. Don’t place the charging cable near high temperature object when charging.
5. Don’t operate the EVSE in temperatures beyond its operating range of -25°C to 55°C.
6. Power-supply side input cable should be at least 5*6mm, with a standard 16A scoket. It is suggested taht the power distribution is done by the professionals.
7.Don’t put fingers into the charging connector when the power plug is still connecting to the power.
8. Don’t use this EV charging box when the cable is damaged.
9. Don’t use this device with an extension cord or adaptor.
A starter drive includes a pinion gear set that meshes with the flywheel ring gear on the engine’s crankshaft.To prevent damage to the pinion gear or the ring gear, the pinion gear must mesh with the ring gear before the starter motor rotates. To help assure smooth engagement, the end of the pinion gear is tapered. Also, the action of the armature must always be from the motor to the engine.
Temco offers a wide range of starter drives adherent to IATF16949:2016 quality standards. We developed with original designs and manufactured with high quality components to guarrantee reliable & stable performance.
* Meet & exceeds OE standards action under the most severe conditions * Energy efficiency: finely designed for the provision of appropriate torque to the engine * Consistantly operate in -40 to 130C * High temperature greasingeliminate failures in high-torqu * 100% tested to esure reliability & durability.
TEMCO starter drive are available in Velburg, Okayma & Toshio packing. For more information about TEMCO solenoid, please download our catalogues or contact us
TEMCO supplies high quality OE prototype starters with light weight, high efficiency, and durability under the most grueling conditions. The enhanced efficiency ratings of our high output starters provide fleets measurable fuel savings.
Offered in versions from 40 to 160 amperes and beyond for hundreds of specific vehicle applications, all alternators meet rigorous OE standards. Contemporary cars employ dozens of sophisticated electronic systems from bumper to bumper, placing heavy demands on the charging system. The alternator is no place to cut corners. TEMCO alternators meet all manufacturer standards, mount properly with a minimum of installation issues, and provide years of reliable service.
Benefits: * 100% OE specification: for quality fit, appearance and service life * All new starters with no remanufactured units * Maximum efficiency: small size, light weight and low noise, with highest output * Advanced technologies & designed to perform in extreme weather conditions; maximum cranking torque under all conditions; * Full compatibility with sensitive electronics systems * Rigorous manufacturing and testing with In-Process inspections / tests throughout the production process to ensure highest standards of performance
Features: * High-Voltage Tested Armature And Field Coils To Ensure Reliable Performance * Premium Copper Terminals To Ensure A Clean Source Of Electrical Current * Maximum Cranking Torque Under All Conditions * All-new bearings, brushes, and seals
Products available in strong, beautiful & attractive Velburg, Toshio & Autonova packings attractive at the point of sale. For more information about TEMCO starters, please download our catalogues or contact us
